Bolt 2000 Deluxe Kit SDI/HDMI Wireless Video Transceiver Set

1 Bolt 2000 Receiver 2 Bolt 2000 Receivers 1 AB Mount 1 V Mount

Watch the Bolt in Action

Wireless Video Refined

Bolt transmits visually lossless 4:2:2 video over the unlicensed 5GHz band at less than 1 millisecond of delay. Bolt’s new firmware ensures your system reaches its full potential right out of the box. We’ve also improved reconnect times so your wireless link is restored instantly when you come back into range.

Reliable Transmission in Any Environment

Operate more than twice as many wireless systems at one location or evade heavy interference. With Bolt 3000, you can transmit over 20MHz channels for a more robust signal in challenging RF conditions.

*20MHz channels allow you to operate more wireless systems at once in a single location and offer a more robust wireless link in challenging RF conditions. However, audio transmission, as well as interlaced, PSF, and 1080p60/50 frame rates are not currently supported.

Diagram displaying Bolt 1000 and Bolt 3000 being used on 20Mhz/40MHz Channels

Smaller, Lighter, and Even More Rugged

The Bolt 1000 and 3000 transmitters are 20% smaller than previous systems and lighter too. We’ve also improved their resilience in high heat conditions so that they operate flawlessly all the way up to 130F.

Bolt 100 and 3000 display of dimension and weight

Sidekick II: Universal Bolt Receiver

Compatible with Bolt 500, 1000, and 3000, the 300ft Sidekick II is the perfect solution for a director’s monitor kit. With an SDI output, support for timecode and start/stop flags, and a built-in test pattern generator, this universal receiver is the most affordable way to monitor a Bolt feed on set.

Diagram of Bolt transmitter multicasting to Cube Encoders, Handheld monitors, Monitors and switchers
Spectrum graph display of the additional channels the Bolt is capable of streaming

More Channels to Transmit Over

Bolt also offers manual frequency control so your crew can carefully manage your wireless workflow wherever you’re shooting. The Bolt 3000 can operate on 2 new DFS channels, allowing interference-free video transmission in more environments than ever before.

Transmit to Multiple Receivers

All Bolt models are multicast capable up to 4 receivers of the same range at the same time. This means you can send your video feed to monitors, switchers, recorders, and even Teradek Cubes simultaneously with no loss in quality or added delay.

Diagram of Bolt transmitter multicasting to Cube Encoders, Handheld monitors, Monitors and switchers

Built-in Cross Conversion

Every Bolt model supports real-time standards and cross conversion from TX to RX, allowing you to automatically convert resolution, frame rate, and inputs.outputs (HDMI / 3G-SDI) without any additional hardware.

Display of Cross conversion of Bolt on Inputs and outputs

Metadata & Time Code Support

All 3G-SDI Bolt models support metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic.

For a detailed list of supported products, please visit our Knowledge Base.

A Bolt Receiver in hand with icons for timecode and metadata

3D LUT Integration

Apply the look you’re after directly to your wireless video feed using Bolt’s integrated 3D LUT technology. Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt’s OSD.

Cut Through the Interference

The Panel Array Antenna is your go-to solution for cutting through wireless interference in crowded environments. When attached to a Bolt 1000 or 3000, the antenna provides an extremely robust directional signal that will ensure your signal arrives uninterrupted.

Built-In HDMI to SDI Converter

Perfect for use with MoVI and other gimbals, Bolt’s TX features a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.

Use of the built-in HDMI to SDI converter on the Bolt Transmitter by connecting the output to a smallHD monitor

Forget About Capture Cards

Bolt’s USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality.

Bolt with a USB3 Cable about to be connected utilizing the GRAB engine
Bolt Colored plates to identify Bolt Sets

The Bolt Identity

To better identify which systems are paired on set, a removable top plate on Bolt’s TX and RX can be swapped out for a colorful anodized one.

Built Like a Tank

Bolt is housed in a hardened aluminum chassis designed to withstand years of abuse in both extremely hot and cold conditions. Both the TX and RX feature 1⁄4”-20 holes for mounting to cameras and monitors as well as 2-pin Lemo connectors for power. Unique to Bolt 1000 and 3000, a built-in OLED on the RX allows you to quickly configure the system as well as apply 3D LUTs at the touch of a button.

schematic drawings of Bolt to showing its rugged design

The Panel Antenna Array

The Teradek Array is a 5GHz MIMO panel antenna designed for use with Beam, Bolt 600, 1000, 2000, 3000 Receivers (Bolt Transmitters, Bolt 300 and Sidekick are not supported). The Array offers a more resilient wireless transmission, especially in challenging RF conditions, by focusing the signal and reducing interference. As a result, you may achieve a boost in the reception range but it will not be above the maximum range.

Features

  • Focuses the wireless signal and reduces interference to achieve a boost in reception range (but not above max range of Bolt set)
  • Composed of 3x16 dBi and 2x14 dBi antennas using 5.1-5.8 GHz MIMO
  • Small, Lightweight and made from UV-protected plastic with aluminum alloy
Watch BC Live Productions Range Test with the Antenna Array
- or -
Watch NEBTEK's Bolt 3000 Range Test

The Protective Case

The Teradek Protective SKB Case is an injection molded Military-Standard Waterproof Case molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design that is resistant to corrosion and impact damage. Features a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve, resistance to UV, solvents, corrosion, fungus and impact damage.

Features

  • Waterproof and dust tight design
  • Molded-in hinge for added protection
  • Trigger release latch system
  • Snap-down rubber over-molded cushion grip handle
  • Ambient pressure equalization valve
  • Resistant to UV, solvents, corrosion, fungus
  • Resistant to impact damage

FAQs and Support Articles

Loading...

Didn't find an answer to your question?

Other Products To Consider

You May Select Up To 3 Products to Compare With You May Select More Product(s) to Compare With Click to Compare Products with Please Deselect Product(s)
[10-0990-1G]


Overview

In The Box

General

not hover

Tech Specs