Bolt 4K Series
Evolved.
Monitor every shot in wide-range detail to retain image integrity with beautiful, lifelike colors, deep blacks, and pristine highlights
Quad-4K I/O for full HDR monitoring and signal pass‑through
Convert Log-based camera footage into HDR formats
Features | Previous Generation | Bolt 4K LT | Bolt 4K | Bolt MAX |
Starting at |
$2,490 |
$2,490 |
$5,490 |
$13,590 |
Entry Model Distance |
500 ft |
750 ft |
750 ft |
3,000 ft |
Zero Delay Wireless Video |
✓ |
✓ |
✓ |
✓ |
12G-SDI 4K |
✕ |
✕ |
✓ |
✓ |
HDMI 4K |
✕ |
✓ |
✓ |
✓ |
3G-SDI & HDMI 1080p |
✓ |
✓ |
✓ |
✓ |
10-bit HDR Video |
✕ |
✓ |
✓ |
✓ |
Receiver Connectivity |
4 |
6 |
6 |
Unlimited |
Intercompatibility |
✕ |
✓ |
✓ |
✓ |
Bolt Manager iOS App |
✕ |
✓ |
✓ |
✓ |
50% Range Boost |
✕ |
✓ |
✓ |
✓ |
All Bolt 4K Series of devices are interoperable, so any TX/RX duo may be paired together. Ranges can be mix-and-matched, so devices will extend image signal to their respective model distance.
With the free Teradek Bolt iOS/Android application, wirelessly pair any TX and RX devices, manually designate specific 5GHz channels, apply individual RX LUT output settings, and monitor environmental signal interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.
Pair devices with 13x 40 MHz Channels
Real-Time Signal Metrics
Camera Metadata,Timecode, LUT
5 GHz + DFS Channel Selection
Wireless signal protection is guaranteed with AES-256 encryption and RSA 1024 key pairing. Combined, these two technologies ensure that your wireless feed cannot be decrypted, and outside receivers may not be connected to your system without explicit authorization.
Bolt 4K devices operate over 13x 40MHz frequencies to avoid signal interference. For particularly noisy environments, Fixed Frequency Mode locks paired TX/RX devices into a single, designated 5GHz frequency, resulting in improved communication and instantaneous reconnection times.