This product wizard will guide you through the process of building your Bolt kit. If you know exactly what you want, you can skip this process.

Select your Bolt Series

Bolt is a zero delay wireless video transmitter with HDMI and/or 3G-SDI I/O. Your system’s range is dependent on which model you select. More Info

The Bolt uses wireless signals to transmit video. Interference weakens wireless signals and is unfortunately inevitable. Interference can be caused by physical objects, walls, other wireless devices like cellphones, electrical interference from cables, computers, lighting fixtures, and even weather conditions like fog.

The stronger the wireless signal the higher the chance you will be able to maintain a reliable wireless signal at a greater range.
Each Bolt Series has different wireless signal strength and the one you choose will depend on the level of interference and the range you wish to achieve in your environment.

Please choose from the following:

  • 3000 Series

    The most powerful and reliable wireless solution in the Bolt family.

    • Maximum range of up to 3000 ft
    • smaller, lighter and more robust than previous versions of Bolt (2000, 600, and 300)
    • 20MHz and 40MHz channels
    • Rapid reconnect
    • Built in HDMI/3G-SDI converter on the TX
    • Manual frequency selection
    • Multicast up to 4 receivers
    • Metadata, timecode, start/stop flags, and 3D LUT support
    Starting at (for 3G-SDI): $9,490 USD
  • 2000 Series

    Long range and incredibly robust, but with fewer DFS channels than the 3000.

    • Maximum range of up to 2000 ft
    • 40MHz channels
    • Manual frequency selection
    • Multicast up to 4 receivers
    • Metadata, timecode, start/stop flags, and 3D LUT support
    • Compatible with 1st generation Sidekick receivers
    Starting at (for 3G-SDI): $8,490 USD
  • 1000 Series

    Medium range wireless transmission with external antennas.

    • Maximum range of up to 1000 ft
    • smaller, lighter and more robust than previous versions of Bolt (600, and 300)
    • 40MHz channels
    • Rapid reconnect
    • Built in HDMI/3G-SDI converter on the TX
    • Manual frequency selection
    • Multicast up to 4 receivers
    • Metadata, timecode, start/stop flags, and 3D LUT support
    Starting at (for 3G-SDI): $5,490 USD
  • 500 Series

    Short range wireless transmission with internal antennas.

    • Maximum range of up to 500 ft
    • smaller, lighter and more robust than previous versions of Bolt (300)
    • 40MHz channels
    • Multicast up to 4 receivers
    • Metadata, timecode, start/stop flags, and 3D LUT support
    Starting at (for 3G-SDI): $3,490 USD
  • 300 Series

    Affordable short range wireless transmission with internal antennas.

    • Maximum range of up to 300 ft
    • 40MHz channels
    • Multicast up to 4 receivers
    • Metadata, timecode, start/stop flags, and 3D LUT support
    • Compatible with 1st generation Sidekick receivers
    Starting at (for 3G-SDI): $2,490 USD

Select Your Video Input/Output Options

Bolt is available in HDMI, 3G-SDI, and dual (HDMI + 3G-SDI) models.

Please select your desired I/O combination:

  • 3G-SDI / HDMI

    Use either HDMI or 3G-SDI video input/output.
    • 3G-SDI input
    • 3G-SDI loop out
    • HDMI input
    • 3G-SDI output
    • HDMI output
    • USB 3.0 output
    Starting at (for 1Tx/1Rx Set):
    $
  • 3G-SDI only

    Accepts only 3G-SDI input/output. Includes a 3G-SDI loop out on the Transmitter.
    • 3G-SDI input
    • 3G-SDI loop out
    • 3G-SDI output
    • USB 3.0 output
    Starting at (for 1Tx/1Rx Set):
    $
  • HDMI only

    Accepts only HDMI input.
    • HDMI input
    • HDMI output
    • USB 3.0 output
    Starting at (for 1Tx/1Rx Set):
    $

How Many Receivers?

Your Bolt Set has 1 Transmitter and can transmit video to 1 to 4 Receivers outputs simultaneously. More Info

Each Bolt transmitter can transmit up to 4 receivers simultaneously. To protect against cross-talk, we recommend placing each unit at least a few feet away from each other. It is not possible to mix receivers of different series.

  • Your Bolt Set includes 1 Bolt Transmitter to connect to your camera or other video source.

    Your Bolt Transmitter supports transmitting metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic.

    For a detailed list of supported products, please visit our Knowledge Base.

    Each Bolt Set should have 1 Transmitter. If you wish to configure another Bolt Set, please complete this Set and then run this Wizard again for your next Bolt Set.
    Price per unit: $
  • Please select how many receivers you would like:

  • Bolt Receiver

    Connect your receivers to monitors, switchers, recorders or a Teradek Encoder for streaming to the Internet.

    • a built-in OLED display and joystick to easily configure your Receiver
    • 3D LUTs (Color Grading) can be applied to the output of your RX (additional LUTs can be uploaded via the Bolt Manager software)
    • USB 3.0 output allows zero delay video ingest into computers - no capture card required.
    • Compatible with the Teradek Array Antenna for increased range and wireless resilience.
    • The series of Receivers does NOT have an OLED display for on-the-fly configuration. Please consider upgrading to a more advanced Bolt series if you want this feature.

    If you decide to buy more receivers at a later date, you can pair those receivers with your transmitter using our Bolt Manager Software.

    Price per unit: $
  • Bolt Sidekick Receiver

    You may want to consider the Bolt Sidekick Receiver. It's a smaller size receiver with a limited range (up to 300 ft) and a single video output however it does not include an OLED display screen, LUTs, timecode, or start/stop.

    Price per unit: $
  • Free Protective SKB Case

    Your Bolt Set also includes a Protective SKB Case ($150 value) to protect your new Bolt Set.

    • Includes a custom foam interior that accomodates 1 Bolt Tx, 2 Bolt Rx
      Your additional Receiver(s) may not fit in the custom foam of the protective case.
    • Injection molded, waterproof, ultra high-strength resin case that is resistance to UV, solvents, corrosion, fungus, and impact damage.
  • Bolt Tx/Rx Bundle Discount: -$
  • SubTotal: $

Each Bolt system ships with omni directional antennas. However, a Panel Array Antenna can be connected to your receiver for increased range and wireless resilience.

Your Bolt Set has internal omni-directional antennas. This allows your Bolts more flexibility when mounting but you will have less control over the range and performance of the device.

  • Antenna Array

    The Panel Array Antenna is your go-to solution for cutting through wireless interference in crowded environments. It attaches to your Bolt Receiver, to provide an extremely robust directional signal that will ensure your video arrives uninterrupted.

    • Focuses the wireless signal and reduces interference to achieve a boost in reception range (but not above max range of Bolt set)
    • Composed of 3x16 dBi and 2x14 dBi antennas using 5.1-5.8 GHz MIMO
    • Small, Lightweight and made from UV-protected plastic with aluminum alloy: 13.8 x 13.8 x 1.25" 2.45 lbs
    Watch BC Live Production's range test with the Antenna Array:
    For an additional:
    The Bolt Series is NOT compatible with the Panel Array Antenna.
    Please consider upgrading to the Bolt 1000 Series, so you at least have the opportunity to use the Antenna Array later. Feel free to chat with us about some other options we may have available for you.
  • Upgrade to the Deluxe Kit

    The Bolt Deluxe Kit has everything you need to get the most performance out of your Bolt system. The Bolt Deluxe Kit includes:

    • 1 Dual 3G-SDI/HDMI Transmitter
    • Dual 3G-SDI/HDMI Receivers Receiver
      If you select the Deluxe Kit, your Transmitter and 2 of your Receivers your Receiver will be upgraded to a Dual HDMI and 3G-SDI Input and Outputs.
    • 1 Antenna Array
    • 1 protective SKB Case with custom foam to accomodate the antenna array, 1 Bolt Tx and up to 2 Bolt Rx's.
      Your additional Receiver(s) may not fit with the custom foam in the protective case.
    • 1 Battery Mounting Plate for 1 Receiver with

    For an additional: $
  • I'll stick with the Omni-Directional Antennas

    Your Bolt Set already comes with Omni-Directional Antennas. The Transmitter comes with 2, your Receiver comes with 5.
    Your Bolt Set already comes with internal Omni-Directional Antennas. Please remember to keep the area around the antenna clear to get the best performance.
    For no additional cost.

Your transmitter and receivers will need to be powered and mounted. The transmitter and receiver(s) both use 2-Pin Lemo connectors for power and have 1.25 inch threaded screw holes on the bottom for mounting. Be sure to mount the Bolt Tx and Rx's so that the antennas have a clear line of sight to each other. Please consider the following:

Powering and Mounting Your Transmitter

Typically, your transmitter is mounted/powered with your camera. It includes a PowerTap cable to power from your camera's battery and a hotshoe adapter (1/4"-20in) for mounting.

How long your Bolt Tx will last with a battery depends on the capacity of your battery. More Info

Powering and Mounting Your Receiver

Each Receiver comes with a convential AC power adapter.

Be sure you also purchase properly shielded video and power cables, as poorly made cables will contribute to interference reducing the performance or damage your Bolts. Teradek offers the properly constructed 75ohm rated cables that work best with our products.

Please consider the following Accessories for your Bolt Set:

Scroll down through your other options and press the "Continue" button to go to the next step